Pin Deck Spray Pkg/4 Cans **LTD QTY**
Details
Details
- Eliminates Off-Spot Pins and Out-of-Ranges
- For All Types of Pin Decks
- Use manually or insert directly into your 2016 FLEX Lane Machine
- One can can do 95-105 lanes, depending on how heavily it is applies
- Use 1-2 times a week, or as needed
How do you apply Spot On Pin Deck Spray?
Spot On was designed to be applied by the 2016 FLEX lane machines, but can also be applied by hand. With machine application, you can expect the lane machine to apply 4-5 ml of Spot On to the back two rows of the pin deck. For more information, please see your lane machine manual.
To apply Spot On by hand: Only a light mist of Spot On is needed on the back two rows of the pin deck. If using a new can, you will need to apply the small actuator to the valve stem in order to spray the product. Hold the can between the 1 pin spot and the 2-3 pin spots and point it towards the 7 pin spot. Quickly spray on a light mist going one time from the 7 to the 10 pin spots (the mist should cover the back two rows). Replace the cap after use. Allow 10 minutes for Spot On to dry before using lane or setting pins.
How do I know when Spot On is dry?
When applied, Spot On will be a milky-white color. It becomes clear when it is ready for use. The dry time will vary slightly depending on how much is applied. Typical dry time is 10 minutes when 4-5 ml of Spot On is applied. If more than 5 ml is applied, it can take up to 15 minutes for the product to dry.